A *LAN 3812 PJL device description cannot be used to print to this printer when directly connected to the LAN. This is commonly found in dot matrix (or line) printers, ink jet printers, or older laser printers that do not support the HP PCL5e printer language. If PJL is set to Y, then the printer model should work with a *LAN 3812 PJL device description, which communicates with the printer and print server using the HP Printer Job Language (PJL) protocol. Prevent hair damaged from harsh chemical, a line of products that combine the best between nature and science. Maximum respect to your hair and scalp Note: If the printer tables refer to any printer data streams other than the ones listed above, then an explanation of those data streams will be included at the bottom of the printer tables. Note: A large number of HP LaserJet and compatible printers, and even some line matrix printers, have built-in support for SNMP. Many printers will have support for both PJL and SNMP, but even more printers have support for only SNMP, so if the SNMP field has a "?" then it is a good idea to try configuring a *LAN 3812 SNMP device description to see if it will work.

The term CODE V refers to a printer language from IBM that supports printing graphics and bar codes on certain printers. Printers that use this printer data stream will work with Host Print Transform (HPT) and might work with a PC5250 Printer Definition Table (PDT) file.The terms GDI, Host-based, Host-based (GDI), Host-Based Printing, Proprietary (GDI), and Windows GDI are generic terms that can refer to any Host-based or Windows-only printer, which use a proprietary printer data stream rather than an industry-standard printer data stream such as IBM Proprinter Data Stream (PPDS), Epson ESC/P2, HP Printer Control Language (PCL), or Adobe PostScript (PS). These printers support printing from Windows, and possibly from Macintosh or Linux, but will not print directly from IBM i, IBM i5/OS, IBM OS/400, UNIX or any other non-PC-based Operating System, even if the printers can be network-attached. Because these printers require a proprietary printer data stream, they will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File. Note: Configuring a PC5250 printer session without Host Print Transform (HPT) and without a Printer Definition Table (PDT) file is most likely to print successfully. However, you will not be able to print *AFPDS spooled files because that requires using Host Print Transform, and you will have limited control over the formatting of your output (including limited control over the font selection). Therefore, configuring to print to a Host-Based Printing, Proprietary (GDI), or Windows GDI printer is considered unsupported, as would printing to any other host-based printer. The IPP column shows whether a *LAN 3812 IPP device description can be used to print to this printer when directly connected to the LAN, WAN or Internet. The term IPP refers to the Internet Print Protocol. IPP allows for two-way communication with the printer when attached to the LAN using a print server that also supports IPP. Support for the IPP Print Driver is available in the base code for R520 OS/400. For more information on the Printer Data Stream, Host-Based, MFRTYPMDL for HPT, LPR, PJL, SNMP, IPP, and PDT File for PC5250 columns, please refer to the section titled Explanation of the Fields in the Printer Lists at the bottom on this document. EFGIS means English, French, German, Italian, Spanish languages, Non-EFGIS means all other European languages

Laser and multiple function printers might be able to automatically select the proper printer emulation mode based on the print data that it is sent. However, the supported emulation modes will still determine the printer capabilities and the MFRTYPMDL for HPT or PDT File for PC5250 setting that is needed. For best results, these printers should support HP PCL3, HP PCL5, HP PCL6, or IBM PPDS, if possible. The term Epson ESC/P2 refers to the ESC/P2 printer data stream. ESC/P2 was developed by Epson, but is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers. The SNMP column shows whether a *LAN 3812 SNMP device description can be used to print to this printer when directly connected to the LAN. The term SNMP refers to Simple Network Management Protocol. SNMP allows for two-way communication with the printer when attached to the LAN using a print server that also supports SNMP. Support for the SNMP print driver is available in the base code for R450 OS/400 and above, and is being added to R430 and R440 OS/400 through PTFs.For more information on *LAN 3812 SNMP device descriptions, please refer to the following documents: Original Windows Server 2016 driver will function properly, however if WSD is used to install your device, device information cannot be acquired. For more information on *LAN 3812 IPP device descriptions, please refer to the following documents:

The printer data stream is not host-based. The printer data stream still may not be compatible with Host Print Transform (HPT) or a Printer Definition Table (PDT) file. This document contains information on the capabilities that are supported on the printer hardware. It also indicates whether each printer model is likely to work when printing from a System i using LPR, PJL, SNMP, IPP, or a PC5250 printer session. The terms PostScript 2, PostScript 2 emulation, PostScript 3, and PostScript 3 emulation typically refer to an emulated version of the PostScript printer language, but they might also be used when a printer uses true Adobe PostScript support. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File. The terms Adobe PostScript 2 and Adobe PostScript 3 refer to versions or levels of the Adobe PostScript printer language. PostScript was developed by Adobe, but is used by a number of other printer manufacturers, though typically in laser printers. The PostScript printer data stream will not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) File.

If Host-Based is set to N and MFRTYPMDL for HPT has a value other than n/a, then the printer model should work with Host Print Transform (HPT). It is recommended that HPT be used whenever possible because it supports printing *AFPDS spooled files on laser printers and provides better formatting and font control through modified Workstation Customizing Objects (WSCSTs). Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether a *LAN 3812 PJL device description will work or not. The term IBM PPR refers to the IBM Proprinter data stream. IBM PPR was developed by IBM, but it is used by a number of other printer manufacturers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers. The XL designates wide-carriage printers, the II and III designate upgrades to the Proprinter data stream, and the 24 refers to the Proprinter data stream used for 24-pin printers. General Application time 25 – 35 Minutes approx, depending on the state and degree of the hair’s receptivity.

Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether LPR/LPD will work or not.If SNMP is set to Y, then the printer model should work with a *LAN 3812 SNMP device description, which communicates with the printer and print server using the Small Network Management Protocol (SNMP). The terms PGL and IGP (PGL) refer to the Printronix Graphic Language. PGL is not supported by Host Print Transform (HPT), but HPT should pass IGP/PGL-compatible data streams to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST). N1018919: Using the Add Printer Wizard within Windows to Test Connectivity to a LAN-Attached Printer