The SANIFLO Sanitop is similar to the original SANIFLO, but it allows the installation of a wash basin as well as a single WC. It is perfectly suited to all such applications in loft conversions, under stair installations, and home extensions. Expert Support: Our knowledgeable team is always ready to assist you. Whether you need help identifying the right parts or have questions about your Saniflo system, we’re here to provide expert guidance. If your Sanicompact won’t flush properly it may be a water supply problem, your Sanicompact must be connected to the mains water to work properly, if its connected to the gravity fed water system it won’t supply enough water to flush the toilet.

Regularly inspect the valve for any visible damage, wear, or debris that might obstruct its proper function. Do you need Saniflo spares, we keep some spare parts for Saniflo and other branded macerators like, How to test either flush a toilet or fill a basin full of water, pull the plug out of the basin and let the water go and put your nose near the air vent on the Saniflo, if the smell that you can smell in the property is the same as the one coming out of the Saniflo air vent problem solved. One of the most common reasons for a Sanitop not turning off is a faulty float switch. The float switch is responsible for controlling the water level in the grinder unit. If the switch is not working correctly, it may not be able to shut off the unit when the water level reaches a certain point. This can cause Sanitop pumps to continue running even when it’s not needed, leading to increased wear and tear on the system. 2. Clogged Pump

Normally this is bad news, the reason for this type of problem is a worn or faulty motor as water is getting in to the electrics and fusing the circuit. Sometimes but in rare cases you may have loose wiring where the Saniflo is connected but is very rare its normally a dead Saniflo, you will have to buy a new unit as the motor is unrepairable. Plan B, put a plug on the macerator and plug it in to a different circuit using and RCD Adapter for safety and see if the machine works, if not it is most likely time for a new macerator pump

Here are 5 good reasons why you should always choose a Saniflo approved engineer for Saniflo repairs and service. If your Saniflo Macerator has never been de-scaled your macerator is probably full of limescale if you live in a hard water area. Finally, if your Sanitop is not turning off, it could be due to installation issues. If the unit was not installed correctly, it may not be able to function properly, leading to problems like pumps not turning off. In this case, it’s important to have a professional plumber inspect the system and make any necessary repairs or adjustments.

Easy Product Identification: Finding the right spare parts is hassle-free with our product ID system. Simply enter the product ID to view all compatible parts and accessories for your specific Saniflo system. There will be a foreign object inside the Saniflo caught on the macerator blade like Tampax/sanitary towels, toilet cleaning wipes or baby wipes. A Saniflo cannot chop these items up and throw the motor off balance when it is running, you will need to remove these objects immediately to avoid damaging the motor. WARNING– Do not remove the motor dielectric oil from any Saniflo motor as it needs it to run. All the electrical repairs to the Saniflo are carried out in the box connected to the motor, there is nothing to actually fix inside the motor itself, we don’t keep the oil or sell it. If you’re considering installing a Sanitop system in your home or property, you might be wondering about its safety features and whether it includes a non-return valve. In this article, we will discuss the importance of a non-return valve, its role in a Sanitop system and how to maintain it. Let’s dive in!

Extensive Saniflo Spare Parts Collection: We offer a wide range of Saniflo spare parts, ensuring you find what you need to keep your system running smoothly. From pumps and macerators to fittings and accessories, we’ve got you covered. If your Saniflo is three years plus old and has never been descaled you may have to do it a few times, always read the label, never leave the descaler in the Macerator box any longer than the manufacturer specifies or you could damage your macerator pump. If you have to change the valve make sure you use Descaler afterwards to clean out the machine at regular intervals 2-3 times per year.The answer is no, heavy and continuous over use of bleach or other toilet cleaners can shrink and harden the Saniflo rubber membrane which covers the pressure switch. When the rubber membrane shrinks it stops the pressure switch from turning off properly. We ourselves have repaired a Saniflo which was around 20 years old, so they can last a long time if used and descaled properly. Water pressure issues can also cause some Sanitop pumps not turn off. If the water pressure in your plumbing system is too high, it can cause the Sanitop to leak water and continue running even when it’s not needed. This can lead to increased wear and tear on the system and potential damage to the unit. 5. Installation Issues We can supply a new membrane and have it delivered within a couple of days. Buy New Saniflo Broy Pro Membranes Now! Fast Service: We take pride in offering a fast and efficient service to our valued customers. You can rely on us to promptly deliver your Saniflo spare parts to your doorstep.

When it is quite dirty in the bottom as the Saniflo fills with water, the air is pushed out of the Saniflo air vent this is where the fouls smells come from. There are a few reasons for this type of problem, you could have a faulty Saniflo microswitch, a faulty Saniflo membrane or water is getting in to the Saniflo from a dripping tap, overflowing toilet, a condensing boiler may be connected to it. More Saniflo Problems Troubleshooting FAQ Solutions The majority of our engineers have between 10 and 20 years experience working with the Saniflo range and will have encountered The limescale forms all over the rubber membrane and stops it being flexible enough for the microswitch inside the control box to be turned on and off when required to do so. Sometimes if the rubber on the Sanitop macerator non return doesn’t have limescale damage and is not sealing could be the rubber has been damaged either by a foreign object or the rubber has been damaged by chemicals and the rubber valve has enlarged or is distorted.

Who are we?

Competitive Pricing: We understand the importance of reasonable prices, and potential customers can easily see if our prices are in their range. All prices displayed are inclusive of VAT.