Clamps come in a wide range of sizes, allowing you to choose which best suits the size of the material you are clamping. There are a few numbers to consider when it comes to size: The Jaws: The jaws of the face clamp are long and curved pieces of metal that when brought together, form a C-shape. They have a stationary jaw, which remains fixed throughout the operation, and a moveable jaw, whose position can be adjusted.

What Is A Face Clamp? - Top Woodworking Advice What Is A Face Clamp? - Top Woodworking Advice

The pressure that has been selected using the screw will be retained for some time by the clamp. The position of the screw on the clamp can vary depending on the model and make of the clamp. Most face clamps, however, have the pressure screw located at the end of the handle to provide easy rotation for the user. The location of the moveable jaw is controlled by the lever, so when the lever is pushed away from the handle the moveable jaw will move away from the fixed jaw, leading to the clamp being opened. However, when the lever is moved towards the handle, the moveable jaw also moves towards the stationary jaw and closes in on it.The Jaw Opening: The jaw opening can easily be defined as how far away the moveable jaw can move from the fixed jaw. This opening space or width between the ends of the two jaws is known as the jaw opening and it determines the clamp’s capacity. The clamping faces are what set the face clamp apart from other forms of clamps as the clamping faces are very wide, ensuring the pressure is spread very thoroughly across the width of the workpiece. The width of the clamping faces also ensures that it can hold down large-sized workpieces relatively easy and can also be used to hold thin pieces in their grip. Face Clamp: These clamps are something like a pinch clamp, but with a square shape and wide pads that clamp securely without marring a delicate surface. They are useful for holding delicate pieces in place for gluing or drilling. Corner Clamp: This is a specialty clamp that’s designed to hold pieces together at a 90-degree angle. It’s a very useful clamp if you are building picture frames, drawers, or similar items. Pinch Clamp: Also called a hand or spring clamp, these simple clamps are useful for holding delicate materials together.

Trend Pocket Hole Jig Face Clamp Clamping Tool with Trend Pocket Hole Jig Face Clamp Clamping Tool with

Bar Clamp: Also called an F-clamp, due to its shape, the bar clamp opens much wider than a C-clamp, allowing you to hold much larger workpieces together. There are bar clamps as small as 6 inches, but most woodworkers find that 24 to 36 inches is the most useful for large projects.The Pressure Screw: When the jaws of the face clamp are closed, the screw can then be used to adjust the amount of pressure that is released by the jaws and onto the workpiece. You must first open the jaws of the clamp by pushing the lever away from the handle. This step will pull the moveable jaw away from the fixed jaw and creates the space needed for the workpiece to fit in. These parts include the two jaws, the pressure screw, an adjusting lever, clamping faces, and a handle. The sizes and some other factors of the clamp, however, depend on the model and make of the face clamp. The Throat Depth: The throat depth of the face clamp is referred to as the distance from the ends of the jaws to the edge of the handle. The throat depth determines how large a workpiece can be clamped by that specific clamp. Some face clamps are designed with longer throats so they can accommodate larger workpieces.