The master Heavy Duty C-Stand (or Century Stand) comes from the early days of motion picture production. The C-stand was widely used to hold up large reflectors which were used to catch and reflect the sunlight to illuminate the set before the introduction of artificial lights later. You have to remember this phrase when working with grip equipment: “Righty Tighty; Lefty Loosy”. When you are rigging equipment to hold things, there’s a right way and a very wrong way to do this. How would you rank the sturdiness of these three stands? Which one is more likely to tip over? I have a Godox AD600. Do I need to get the C-stand to prevent it from tip over? Matthews Studio Equipment (2022-07-26). "20" C+Stand w/Spring Loaded Turtle Base, includes Grip Head & Arm". matthewsgrip . Retrieved 2019-11-06. You can use this arm for your overhead shooting with smaller cameras. Again, you have to counterweigh it when doing so. I highly urge you NOT to rig any of the bigger pro DSLR’s this way. They are just too heavy. 4. The Legs

The PIXAPRO Heavy Duty C-Stand Photography is entirely made of metal with a stainless chrome finish & can be extended to a full length of 300cm (118”), which can then collapse right down to 145cm minimum height, making it storable and portable, an all-round excellent stand to use for general use. They come in two sizes, a 40 inch stand or a 20 inch stand, also called a Shorty. The Parts Of A C Stand 1. TheColumn Our C-stands empower you with unparalleled lighting control. Whether you need your lights positioned at unique angles, raised to greater heights, or placed in tight spaces, these stands offer the flexibility to meet your creative vision.

Stand Spares

However, I keep seeing tons of bloggers telling people this is THE way to do an overhead shot and many of them are not using the C-stand properly for their camera. So this post is to show you how to do it properly if you really want to use this method.

The PIXAPRO Heavy Duty Portable Photography C-Stand with a boom arm allows you to mount your light stand up to 300cm in height, offering a stable platform to use and move your lighting effortlessly overhead. This makes it an essential piece of kit for the modern studio, great for portrait, beauty, product, fashion photographers or videographers. Also notice the tallest leg is in the direction of the arm. This will help to ensure that the stand won’t fall over. It only has three legs after all. So you are putting the weight over the largest leg. If we missed anything, or if you have any recommendations on what we should consider for next year, please comment below! Best Travel / Compact Light Stands Learning how to use a C-Stand is incredibly important because it also affects the safety of the set. There are key steps to keep in mind when setting up a C-Stand to ensure the safety of the crew and talent on set. 1. Unfolding the legs The 40″ Grip Arm with Hex Stud is a 2 1/2″ grip head mounted on the end of a 40″ piece of steel tubing 5/8″ (16 mm) in diameter and finished with a faceted hex stud to keep lighting fixtures in position when they are placed on the end of the arm. The 2-1/2″ grip head consists of a pair of rotating aluminum discs attached to a 5/8″ (16 mm) receiver. The discs have four different sized “V” shaped jaws to accept any accessory with a 5/8″, 1/2″, 3/8″ or 1/4″ mounting stud or tubing. The “V” shaped jaws have “teeth” that grab whatever is mounted between the plates securely. The 2-1/2″ grip head features an oversized ergonomic “T” handle and dedicated roller bearings designed for maximum torque.If your camera does not have a rotating screen, it will be difficult for you to see that, so you’ll need an eye piece adapter like this one called a Right Angle Finder made for your camera.