The ISO Stand MkIII makes sure to get the most out of the speakers of your choice by enabling you to freely place them in the perfect spots and at the exact right height – and by isolating the speakers with patented IsoAcoustics mechanics. Facebook sets this cookie to show relevant advertisements by tracking user behaviour across the web, on sites with Facebook pixel or Facebook social plugin. They are shaped with an internal taper and concave that prevents off-axis movements and keeps the energy on-axis and aligned with the direction of the transducer’s travel. I can’t quite imagine listening without ISO Stands now, and while more expensive than foam-rubber, could easily be one of the best upgrades you could ever make to your studio setup. If you want to tilt down, insert either two of the short or two of the long inserts into the back tubes.

Many succumb to the foam-pad concept, positioning shaped foam-rubber mats, designed for purpose, under each monitor to help de-couple the vibration. We recommend using our online calculator to determine which ISO-Stand model is the best fit for your monitors. The ISO-430 was designed for large studio monitors, horizontally positioned monitors, and guitar amplifiers.Whether you’re a pro mixing in the studio – a musician creating in a home project environment – or an audiophile who appreciates every nuance of music and sound – you’ll hear and appreciate the difference with the ISO Stands. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.

Integrated into the speaker shelf are four isolators that employ the technology IsoAcoustics also uses in its ISO-PUCK series. In the lowest configuration, the monitor can be tilted down to focus the tweeter to a height below the original supporting surface - providing superior isolation and sound improvement. Information that we collect may be transferred to the following countries which do not have data protection laws equivalent to those in force in the European Economic Area: the United States of America, Russia, Japan, China, and India.I wasn't sure how well these would work as they would not extend the entire bass of the speakers, but the rubber cups stick (by pressure and vacuum, not by anything that would leave residue! Raising and tilting the monitors to the optimum position can be achieved in these circumstances using the IsoAcoustics stands. This additional inertial dampening offers the potential of tighter bass response and less coloured sound projection.

We will not, without your express consent, supply your personal information to any third party for their or any other third party’s direct marketing. By applying EQ, you can correct problematic frequencies associated with the characteristics and processing of the room and get the right studio sound. To record the frequency response of the room before and after installing the racks, I used a calibrated microphone. In a typical Desktop Audio Workstation (DAW) configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20″ above the work surface. The patented isolation system from IsoAcoustics is a key feature of the ISO-155 stands, providing superior isolation and decoupling from the supporting surface.The previous Auralex mopads were decent but this is nevertheless a great improvement, never going back ! If you are not certain which model is the best fit, you can submit an inquiry to IsoAcoustics for review. And because ISO-L8R155 speaker stands also allow you to raise and tilt your speakers, tweeters are always at ear level, providing the optimal listening position. The same goes for the ISO-200Sub, unsurprisingly designed for modest sub units, so you’ll probably only need one anyway.