It is ideal for use on wood carvings and turned wood, skirting boards and doors, and is widely used in the pine furniture industry. If it is on a previously waxed wood then it may work by re-coating the area using the same wax tone. Having since moved on to two additional colleges I’ve always made sure we did business with Tilgear. uk/briwax-wax-polish-original-clear-5-litre-brwwpcl5 42643 Briwax Wax Polish Original Clear 5 Litre - BRWWPCL5 https://www. Its organic, gentle features mean it can be applied straight to raw woodwork or wood treated with a sanding sealer and give a longer-lasting result.

Briwax Original is formulated with fast drying, stronger solvents which speed up drying and also increase the cleaning ability of the wax slightly. An easy-to-use blend of beeswax and carnauba wax which dries almost instantly and gives excellent results on the lathe or by hand. For antiques and pre-finished furniture, first check compatibility, then apply BRIWAX in small areas with a clean soft cloth. LSDM Limited, registered address: Ground Floor, Boundary House Wythall Green Way, Wythall, Birmingham, England, B47 6LW.Once the sanding sealer is dry, lightly wire wool over using very fine 0000 steel wool to flatten and smooth the finish. An amazing experience so far 10/10 for service I must admit" - D Shah, Designed with Elegance UK "I have used Tilgear to supply us with goods since 2014 when I started as a Construction Technician. The wax is commonly applied to antique furniture during restoration to revive the wood's original quality. For a guide and comparison of our wax polishes, have a read of our blog, Wax Polishes, Which Should I Use? On bare wood, you can stain and seal the wood first using a shellac sealer (but this is optional) Apply the Briwax using a lint free cloth in the direction of the grain.

On previously finished surfaces, we recommend to use Priory Polish Reviver with very fine Wire Wool.Yes you can apply this on top of a danish oil as long as the danish oil is fully dry and cured correctly. His business was acquired by the Bollom Group in 1961 who grew the brand successfullyin both the professional and consumer markets. You can use any of the other colours in the range if you want to change the shade of your wood and we have all 9 different tinted variations on offer. We Briwax on our Kingsley, Camberwell and Peckham ranges of retail furniture as well as to keep our BRIX modular display system in tip top condition.

The BRIWAX finish can be maintained by further applications which will give increased hardness and shine.This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine. We have used this before on top of a chalk paint finish but I would always test a small area first to ensure compatibility. Apply the Briwax using a lint free cloth or very fine 0000 Steel Wool, working in the direction of the grain of the wood. The wax is easy to apply with a Briwax brush, lint-free cloth or steel wool and it dries quickly, saving you application time. Having been greatly distressed at the demise of the Group, Martin and Tony Bollom weredetermined that Briwax should thrive again.