Amazing Casting Products Mold Putty Kit 0.66 lb

Product Information

To enable personalised advertising (like interest-based ads), we may share your data with our marketing and advertising partners using cookies and other technologies. When I tried to tear each sheet, I could not tear the EasyMold with my hands but the Amazing Mold Putty snapped in two after a couple of tries. The Amazing Mold Putty will handle temperatures above 200C but is not recommended for food above those temperatures. Amazing Mold Putty was quite stretchy, but it really took quite a bit of strength to stretch the EasyMold very far.

This amazing mold putty can be put in the freezer without losing flexibility and accepts temperatures as high as 400 degrees F.Mold Making Made Easy, Easily make custom molds by combining equal parts of A (White) and B (Blue) and mix by hand until uniform in color. That’s because the resin cast comes out with a very finely pitted surface giving a frosted look on the surface of the resin. The instructions for EasyMold warn that there are substances which can interfere with curing (such as sulfur, tin, and stearate). I will probably experiment with a couple of smaller molds to get used to working with the material before I go large.

com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US. Let us know Floating Baff Putty from Zimpli Kids, 2 x Colour Changing Bath Putty Tubs, Stretch it, Mould it, Watch it Change Colour!

Even during use, only take out what you need, then put the caps back on immediately until your next use. These food grade molds can be made for candies, gummi bears, gelatin, bento box food, popsicles, cake decorations, and more!

I have a particular application and am hoping you have tried something similar and can recommend which putty would work better. Once mixed, Silicone Plastique ® will stay workable for 15-20 minutes giving ample time to make an accurate and well-made mold of almost any object. Silicone Plastique® is an amazing mold putty that has the consistency of cookie dough and is very easy to mix and apply.

I still end up with a couple little bubbles, but they’re from mixing air into the liquid, not a chemical reaction. To provide the best mould life and the best detail reproductions when pouring low melt metals into your mould, it is highly recommended to preheat the cured mould in the oven to bring it up to a similar temperature before pouring the molten metal into the mould. Polycraft silicone putty is a fast curing silicone rubber, cured at room temperature with excellent dimensional stability and is used for the rapid reproduction of objects. I’ve had the same experience with both the Amazing Mold silicone putty and the EasyCast silicone putty when using clear resin.

mix e qual amounts of Part A (blue) and Part B (white) by weight or volume - knead until a uniform colour is achieved - flatten by hand or roll with a pin between sheets of plastic .Do you have an opinion as to which putty would be the easier to flatten out after unmolding from my original? This will give you the total cubic inches of the Silicone Plastique® layer that you are going to use to make your mold. The slightly longer moulding time, means you can adjust any mistakes, and, if you mix too much it won't be hard before you find something else to mould! Before you start making the putty it is best to get the item ready for the mold putty since it teds to stiffen quickly. Start to gently toss the silicone mass in the starch, keeping the fingers (of gloved hand) covered in corn starch.