Alto Professional Bluetooth Ultimate - XLR Equipped Rechargeable Stereo Bluetooth Receiver For Mixing Desk / Audio Mixer Setups and Active PA systems

Product Information

For YouTubers, solo and small filmmaking teams, wireless XLR microphones can make post production easier with receivers that attach to your camera’s shoe and sends your XLR mic audio directly to the camera. You may see the range of wireless XLR transmitters and receivers listed as “max working distance”. Either way, this specification measures the maximum distance between transmitter and receiver at which the two can still communicate and function properly. If you’re in the US, this is a great, comprehensive guide to wireless regulations: https://www.linxtechnologies.com/wp/wp-content/uploads/fcc_resource_document.pdf Easy Setup and RCA 3.5MM】 Plug B06HD into your home stereo systems via RCA or 3.5MM AUX cable, press the Bluetooth button to enter pairing mode(led indicator flashes red and blue alternately) to pair with phone, and then play your music. After the first pairing, B06HD will reconnect to the previously paired device next time. Since most wireless XLR microphone transmitters having a working range of 250’ (76 meters), converting your XLR mics to wireless will save you money and result in faster setup times and less worries in the long run.

Bluetooth Version 5.0 and Noise Cancellation】With a enhanced signal receiving circuit, this Bluetooth aux adapter can be connected pretty fast in long distance, and provide stable and continuous audio sound. Built-in chip has AEC echo cancellation and ANC noise cancellation circuits, making the sound quality much purer and true. They say that good audio isn’t noticeable and the same could be said for production sound mixers! Interruptions to the filmmaking process to do retakes because of audio issues are the worst. Too many interruptions can even cost you your job! Long Range and Dual Pairing】 B06HD can receive audio from up to 164ft(50m) away in open air and up to 50-70ft(20-30m) away indoors (without obstacles). B06HD supports paring Two Bluetooth sound sources at the same time, such as smartphone and tablet, enable you freely switch music from either one. With similar form to the DN-200BR, DN-200AZB is a Bluetooth audio receiver with inbuilt Class D, 20W RMS amplifier. Utilising Bluetooth CSR 4.0 technology, the receiver can connect with compatible devices with a range of up to 30.5 metres. It is also able to drive 4ohm speakers, or 70/100V line systems – making it a popular choice for restaurants and retail. Limit the amount of interruptions to the filmmaking process by making sure your wireless microphone system has enough battery life to get the job done. Range

Customer Added Media

The body of the unit has the XLR connector at one end, the USB charging point at the other, and a number of switches and LEDs on the side of the body. A switchable -10dB pad sets the output level while a slide switch powers the unit on or off. Two further buttons with status LEDs are used for pairing with the transmitter and for setting up the stereo link function when using two receivers, though we couldn’t try the stereo linking feature as we were only sent a single unit to test. Pressing the Pair button makes the device discoverable and the blue LED flashes, becoming solid once the device has paired. The front facing panel has a rotary output level controller, latching power switch, pairing button with associated status LED, and second BNC antenna connection. It is advised only one (front or rear positioned) antenna is used at any point in time to achieve the best performance. Your budget should be your first consideration when shopping for anything. Filtering products with your set budget will greatly reduce the number of options shown and will simplify your decision making process.

There are several situations where converting a wired XLR microphone to wireless would be convenient. Some of the most popular are listed below: Battery life is the next consideration. Be sure that your plug-on wireless microphone system can power itself for at least the maximum duration of uninterrupted audio you will have to record.

Warranty Info

For music, presentations, speech, weddings and meetings, having a wireless microphone not only makes your stage look cleaner, it is also more convenient and safer for speakers and performers. Note: Max range is always measured with a clear line of sight. In other words, if you have walls or other solid objects between transmitter and receiver, the range will be severely decreased. Frequency Long XLR cables are not only expensive, they also add noise to your signal and create tripping hazards that require proper planning and cable management accessories to keep your working environment safe.