Everbuild Filler Coat Thick Base Coat, White, 5 Litre

Product Information

Water-borne primer can be used for interior and exterior surfaces, such as woodwork, plaster, and hardboard. Apply your water-borne primer with a brush, roller, or spray. We recommend a brush as this will help the primer to penetrate the surface and plug any holes. Clean your paintbrush afterwards with water. Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves. Buying the right primer for your job can be a daunting prospect. You’re in the DIY store and are confronted by endless isles of tins, all looking frustratingly similar. With any painting job, preparing your surface correctly is key to a smooth, professional, and long-lasting finish. Primer paint is a vital step when preparing your surface. With this method, you will be filling in all the imperfections with a special type of filler, specifically designed to smooth over textured walls.

I will discuss all your options below. But firstly a little bit of health and safety advice. Plastering Spirit-based primer can be used on indoor and outdoor surfaces. The shellac-based primer is great for sealing over stains and odour on interior walls and ceilings, and can be used for spot-priming exterior surfaces. Apply with a brush, roller, or spray. Metal Specific Primers The application of all of these smoothing paints is really simple. You just paint them on, however you normally would.On most metal surfaces, one coat of primer is enough. Because metal is not a porous surface like plaster and wood, the primer doesn’t have to absorb into the metal. Its job is to ensure that subsequent layers of paint adhere to the surface and one coat will be enough to do this. How Many Coats of Primer On Plaster?

Application: Apply a generous coat by airless spray followed immediately by tipping off with a medium pile roller. For airless spray application, we recommend a minimum working pressure of 140 kg/cm² (2000 Ib/sq in) with a spray tip size of 19 thou and a fan of 12 inches. May also be applied by brush, roller or conventional spray. When applying by spray, work into all pores and voids with the first pass, then finish with a full coat. If applying by brush, remove brush marks with a partially loaded roller while the filler is still wet. Do not apply if the surface temperature is below 10°C.If you really want to hide those unsightly Artex lines and ridges then it will require a little bit more time, effort, and cost. It may require a little bit more elbow grease on your part, but you should be able to get the job done!

If you’re painting a surface that is prone to rusting, zinc phosphate is a rust-inhibitive primer and will stop the metal from rusting. This primer is suitable for all ferrous metal surfaces and can be applied by brush or roller. You will need to clean your brush and equipment with white spirit. End grain is the result of wood having been cut across the grain and is very absorbent. If you are working with wood with end grain, you’ll need two coats of primer to properly seal the surface and stop your paint and other moisture from being absorbed into the surface. How to Apply Primer PaintDepressions or surface blemishes in the paint film. A common cause is rain that has fallen on the surface before the film has had chance to fully dry. Putting it right If your wood is pre-treated, one coat of primer will be enough to stop your paint from being absorbed and to encourage the paint to adhere. If your wood is untreated, or if the surface has end grain, you will need two coats of primer to ensure an effective seal. How Many Coats of Primer On Metal? This is caused by painting over contaminated surfaces such as wax, oil or polish. The paint cannot adhere to the surface and draws away leaving unpainted areas. This can also be caused by contamination on the brush. Putting it right Softwood can be especially prone to resin exudation, where the natural resin comes to the surface, staining the wood. This resin makes it difficult for paint to adhere to the wood. Apply an aluminium primer to your wood if this happens. The primer will stop the resin from seeping through and compromising your paint system.