Thor 112 Rawhide Mallet Size 2

Product Information

The amount of strike force needed - Again a key consideration. If you're working with tough materials, you will probably need to opt for a mallet with a heavy head. A rubber mallet used on machinery, whilst not marring the surface will not deliver the weight behind the strike that a brass or copper mallet would deliver. The term is descriptive of the overall size and proportions of the tool, and not the materials it may be made of, though most mallets have striking faces that are softer than steel. Rawhide mallet- These mallets consist of a metal head with a rawhide face. They have the advantage of being able to strike heavily with minimal surface damage due to the cushioning elements of the rawhide covering. Please do NOT beat a new rawhide mallet on a concrete sidewalk or curb. The risk is embedding a small pebble that will then scratch a leather surface, dent or scratch soft metals, and eventually damage the rawhide itself. Vintage Rawhide Mallet Rawhide Mallet Head Replacement Split head mallets have removable faces which can be changed to an appropriate material for the job.

On the lighter end of the spectrum, the rawhide is rolled tight with a resin coating that hardens. Those lighter weight mallets are popular with leatherworkers. They are good for tapping down stitch lines, installing hardware like snaps and rivets, and pounding on glued layers to help secure the adhesive bond. These tasks do not require a heavy mallet head. Rawhide - A type of leather that has not been exposed to tanning, primarily used to cover the face of rawhide mallets because of its softness. In its cured form, rawhide is a very hard and durable material but still soft enough for use on softer metals without marring them. For example: The saddle tree (the frame of a western horse saddle) is wrapped in a layer of rawhide before the outer leather pieces are added. It is a very solid material. To experience rawhide in its most basic form, not treated with any chemicals at all, go find a plain unflavored rawhide dog bone at the store. Rawhide mallets, which may employ rawhide covering a steel head, or simply consist of rolled-up rawhide, are used for leatherwork, jewellery, and assembling electric motors and delicate machinery. A mallet is a tool used for imparting force on another object, often made of rubber or sometimes wood, that is smaller than a maul or beetle, and usually has a relatively large head.Nylon/Poly mallets are similar to their Rawhide counterparts. They are a soft material designed to provide a hard striking tool without damaging, denting or marring the surfaces of soft metals or damaging leathercrafters’ tools. The main difference between rawhide and nylon/poly material mallets is that when a nylon mallet is damaged, it must be discarded. A rawhide mallet can be trimmed, filed, sanded, and/or rasped, then continue being used. For other uses, see Mallet (disambiguation). Rubber mallets A wooden mallet Stonemason's mallets of plastic, wood and steel An iron mallet with copper faces. Solid head copper mallets are produced with a round or square head An aluminum meat mallet, for tenderizing meat Meat mallet. Cooking mallet for crushing crops. Indian cobbler tool kit, with an iron mallet As with any tool, the rawhide mallet requires care and maintenance over time. Read on as I explain how to condition a brand new mallet for it’s first use and how to properly maintain the mallet head throughout its life. How to Condition a Rawhide Mallet

Dead blow mallets typically have an internal cavity partially filled with steel shot, lead shot, or loose sand. This modification evens out the time- impulse curve of the impact, enabling a more powerful blow to be delivered without risk of marring the target. [ further explanation needed]There are many applications where the right mallet will make all the difference to the results of your work. To help Cromwell has listed the most common elements to choosing the correct mallet for the job. Mallets are a type of hammer designed for a range of applications, the key difference between a standard hammer and a mallet is that mallets usually consist of a barrel shaped, non-metallic head. Much like a hammer, mallets are used for striking applications, however because of their softer materials they tend to be used in applications where marring the surface of the workpiece needs to be avoided.

Wooden mallet - A wooden mallet tends to be a staple in woodworking applications such as carpentry. Their primary function is to hammer together wooden pieces during assembly such as dovetail joints, without damaging the surface of the piece. They are also used for chiselling where a steel hammer would otherwise damage the end of the chisel. Rubber/Plastic mallet - Consisting of a barrel head made of rubber, a rubber or plastic mallet has the advantage of delivering a powerful blow, using a soft head for minimal marring of surfaces. They tend to recoil as their rubberised nature gives them an element of bounce, so safety measures like eyewear should be taken. They can also become dented and pitted if used to strike sharp objects, so they tend to work best on blunt items. This soft-face hammer is suitable for use as a dual purpose hammer in manufacturing, service and assembly industries. The hide face is ideal for applications where you don't want to disrupt the surface of a workpiece too much, and might be useful in jewelry making or metalworking. It also creates less noise than a metal faced hammer. The copper face provides a high impact blow that is also very safe to use against metal surfaces- minimizing sparking and rebound risks, with less chance of damaging metal workpieces. Rawhide and Rubber mallets both offer soft striking surfaces which are designed to prevent damaging, marring or denting soft metals used by leathercrafters, instrument makers/repairers, and jewelers. The decision of which to use is really up to the person needing the tool. They can be used interchangeably. The biggest difference between the rubber and rawhide materials is that when a rubber mallet is damaged it must be discarded. A rawhide mallet can be trimmed, filed, sanded, and/or rasped, then continue being used. Rawhide Mallet vs Nylon/Poly Mallet RS PRO aims to be your go-to brand for reliability and value for money. We source high-quality parts at great prices and test everything with our in-house experts to ensure the quality you need.Carver's mallets feature heads where the axis of rotation is in line with the handle (so the hitting surface is always round) in a shape like a cylinder on its end, or a conical frustum, or half of a capsule (see images of "stonemason's mallets" to the right). The round striking surface is designed to drive a chisel or wedge and allows for a face to strike when swinging from any angle. [9] Society, New York State Agricultural (1859). "Transactions of the New-York State Agricultural Society". XVIII--1858. The Society: 528–531. {{ cite journal}}: Cite journal requires |journal= ( help)