Bush Workman DAB Radio

Product Information

This test meter can work on any CB radios with the frequency range around 27MHZ. Also, the impedance is 52 Ohm. It is quite important to memorize those specifications so that the device can be operated properly and to maximum effects. Just before we get into the detail of analysing the price of this product, we want to briefly highlight the importance of setting yourself a budget before you spend too much time shopping around for a suitable product. It’s all too often that we get carried away when shopping and find ourselves buying a fantastic product, but probably actually overdelivers on what we need and therefore costs a lot more than we should have spent. So spend a bit of time looking around at the sort of price you can expect to pay for products in the Radios category and use that alongside your own financial situation to set yourself a budget. The next step was to try and narrow down our search even more. So we’ve already looked the prices of products in the Radios category. Then we’ve also looked at the prices of products from Bush. So this step combines the two and looks specifically at the price you’d expect to pay for Bush branded products in the Radios category.

Bush Radios and clock radios | Argos

The accuracy of the measurements – This is a necessary factor that you need to pay attention to. After all, the purpose of a test meter is to make measurements, so it has to be accurate. Don’t worry, we are here to help. We are very willing to offer both technical and personal advice on the matter. Without further ado, here are some features that you should watch out for. The seventh product on the list is a more advanced device. This is an MFJ SWR meter that is designed for both amateur and professional use. The quality of this device is supreme and it’s worth every penny. The abbreviation SWR (standing wave ratio) is a calibration device used to measure the standing wave ratio of a radio. Many people often ignore the importance of this useful tool. The best SWR meter, if used correctly, could optimize the signal reception of your radio. I think that the small problem with this product can be easily solved. The other great points make this meter become one of valuable product that you can not ignore. 6. MFJ RF Power & SWR MeterThe power range of this product is from 0 to 120W, while the frequency range is between 125 and 525MHZ. The standard impedance value is 50 Ohm. Also, with a low insertion loss of 0.3dB, the device can enjoy a permanent connection. This SWR meter can be operated at three different power ranges: high (200W), medium (60W), and low (15W). The frequency range of this product is from 140 to 150 MHZ, and from 430 to 450 MHZ. Depending on different units, the accuracy of the measurement is from ± 5 to 10%. Tuning an antenna involves cutting it to a length that’s more suitable for the frequency being used. This is a highly technical project that you shouldn't attempt without the necessary knowledge and experience. [11] X Research source

radio Deals | Currys DAB radios - Cheap DAB radio Deals | Currys

Next up is material. Read through the product description for Bush Workman DAB Radio to get an understanding of the materials the product is made from. Some materials will obviously be known for delivering better quality item than others. You might also have decided that you’ll only accept a product made from a particular material. This device is a dual-band meter that is compatible with both VHF and UF. The measurements are also accurate and do not differ too much from the true values. It is definitely a great selling point. In addition, the meter can cover the frequency range between 120 and 525MHZ, while the maximum input power is 150W. It does not take too much time and effort to take care of the SWR test meter. Just handle the device with attention and care. You would want to wipe it clean after each use before keeping it in store.Set your radio to channel 1. Turn the channel dial on the radio interface to the left, or press and hold the down arrow button under the display until you reach channel 1. This is the lowest frequency on a CB radio, and the place where you’ll begin your calibration. [7] X Research source

Bush - Workman DAB Radio

To put it simply, the meter would measure both the forward and reflected waves individually with devices called “directional couplers”. After some calculation, the result is out, we have the measurement of SWR. If you’re working with an older analogue meter that doesn’t have a power button, make sure that the “Function” switch is toggled to the “FWD” position to start with.Ask anyone in your immediate vicinity to stand a minimum of 20 feet (6.1 m) away from your radio. If they’re crowding the antenna, they could get in the way of the outgoing signal. Run your radio’s antenna cable to the antenna port on the SWR meter. Like the transmitter port, your meter’s antenna port should be labelled either “antenna” or “ANT.” Connect the antenna lead from the radio to the corresponding meter port the same way you did the coaxial cable, then take a moment to make sure it’s secure. [4] X Research source