Replacement Game Console Base Fixing Screw Stainless Steel Vertical Stand Bottom Screw for PLAYSTATION 5

Product Information

Made from a high-quality ABS plastic, this stand is only meant for vertically-oriented consoles. Simply put, because there’s no claw, it won’t work in a horizontal position. However, it works universally well with both the disc and digital versions of the PS5. The hole cap was designed and modeled by me to be a perfect fit into the tiny hole on the PS5. I sent off a few test variations to be 3D printed to make sure the best design was chosen for you. These are made in the USA right in American Falls, Idaho. It’s very possible to remove the side panels of your PS5, and it’s not simply by physical force: it’s an intentional design feature. The cover for the screw hole snaps into place, and it’s very easy to remove it as long as you can get a fingernail under the edge.

Before you start attaching the stand, you'll want to rotate the stand's hook so it's north-west of the elevated section of the stand. See the picture below for a better idea of what position the hook should be in: While it isn’t an exact clone of the OEM PS5 stand, the Dilwe Replacement PS5 Vertical Stand is a great alternative. We keep the lights on by showing you unobtrusive ads. If you enjoy our community, please consider whitelisting or becoming a contributor: Once you've removed the base and the screw holding it in place, you can store the little bolt inside of the stand itself. A small compartment can be found underneath the stand, and the screw can be pushed into a special slot that will keep it securely in place. Don't forget to do this, as you're likely to misplace the screw if you store it somewhere else. This way, it's always right with your system if you want to change the position again. 3. Use the provided cap to plug the screw hole

Weston PS5 Vertical Stand Screws

Also, no screwdriver or coin or whatever required to remove the screw cap – it’s a very soft plastic, you can remove it easily with even a regularly-chewed fingernail. Same goes for tightening the screw, I was able to get that in as tight as required with just my fingers. Fortunately, the screw you need is hidden inside the base. It only comes out after you rotate the base into the correct position. So turn the base over, and if you’re seeing something like this: Image: Kotaku Australia

When the PS5 is resting horizontally, the disc slot should be on the bottom (if it’s on top, your machine is upside down). he Good News Is That After Some Attempts By Some Masters, They Successfully Found A Replacement For DAP053T. Sony has been saying the PlayStation 5 will deliver “ the future of gaming,” promising that features like its lightning-fast SSD and DualSense controller will enable new gaming experiences that we can’t even conceive of yet. That may or may not end up being true. But after watching the PS5 teardown video that Sony posted Wednesday morning, I don’t care about any of that stuff anymore — because now, my mind is consumed with thoughts of the PS5’s brilliant stand.If you'd prefer to have your PS5 lying horizontally (and who can blame you), then you have two positions - you can either lie the PS5 sideways or attach the stand in the horizontal position. Eurogamer.net is owned by Gamer Network Limited, a ReedPop company and subsidiary of Reed Exhibitions Limited. Whether you want to stand the console up vertically, lay it down horizontally, or change out the giant white side plates entirely, we can explain everything you need to know about the exterior of the PlayStation 5. Can the PS5 be vertical or horizontal? You'll want to place the hooks for the stand on top of the squares at either end of this line of symbols. Do this carefully, but firmly, to ensure that the hooks are properly attached to the PS5. Silent Hill: Ascension’s pricing explained ahead of Halloween premiere The interactive horror streaming series is free to experience, but you can pay to participate

You'll also want to ensure that the hooks attached to the stand are lined up correctly with the elevated piece in the middle, as demonstrated below: It’s hard to see from this photo, but the little rectangular enclosure also has a little slot for the plastic screw cap you just removed. You can now screw the base into the PS5 and mount it vertically. Sony’s manual recommends a “coin or similarly shaped object”, but the same small flathead screwdriver that I used to remove the plastic cap worked just fine. It also appears that these new models, which come in both digital and disc flavours, weigh about 300 grams less than the original PS5 consoles. At this time there isn’t much info out there about what is or isn’t in these consoles that can explain the difference in weight. It’s not just the new screw! Sony has been quiet about these changes and hasn’t released much public information about them. The screw can actually be found within the stand itself - if you look at the bottom of the stand, you'll notice that there's space for a small compartment. The PlayStation 5 has a striking appearance and is easily the best console on the market right now, but there’s more to its design than its massive polar-white fins.The bottom half of the PS5. On the right is the 4K Blu-ray drive. At the bottom, on the left side below the system fan, is the metal flap covering the storage expansion slot, which can accommodate M.2 SSDs.

Repair Disc Loading Issues On Your PS4 Ps5 Such As “Unrecognised Disc” With New Detection Switches. Once you give it a few turns by hand, use a flat screwdriver or coin to continue turning the screw until it’s firmly in place. That’s it! Now the PS5 can be placed upright, vertically. According to the needs of some customers, we have added the "Commercial Express" option. This option will use DHL\UPS\FedEx, etc. We will choose according to the actual situation.If you're planning on having the PS5 stand vertically, then you'll first want to retrieve the screw from the PS5 stand, because, without it, you won't be able to attach the stand to the console.